Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AISI 410S to 1.4313 (aka X3CrNiMo 13-4, S41500) 2

Status
Not open for further replies.
WeldUK

WeldUK

Materials
Joined
Jan 20, 2012
Messages
21
Location
GB
Can anyone recommend a consumable grade?
 
Sort by date Sort by votes
With little other information to go on as to application and environment, use E/ER 410NiMo
 
Upvote 0 Downvote
If service parametrs permit, E/ER 309 might also be used.

 
Upvote 0 Downvote
Thanks everyone for the advice, I am in your same position, no details whatsoever on the service conditions but still asked to provide an answer!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

deepu78
  • Locked
  • Question Question
DBTT-Ductile Brittle transition temperature 2 1/4 Cr-1 Mo -P22/F22 Chrome moly material
Replies
9
Views
2K
weldstan
weldstan
BuonGiorno
  • Locked
  • Question Question
Force fitting a sleeve onto shaft when designed to be a shrink fit.
Replies
3
Views
2K
dgeesaman
dgeesaman
D
  • Locked
  • Question Question
etchant to confirm if silver brazing is on ferrous metal surfaces
Replies
15
Views
6K
dtimberlake
D
Sjscat
  • Locked
  • Question Question
H900 heat treatment of 13-8 stainless
Replies
9
Views
875
EdStainless
EdStainless
tk90
  • Locked
  • Question Question
4140, Surface Hardness, and Coatings
Replies
12
Views
8K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top