Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Advanced Load parameters (Angle)
- Thread starter lsms
- Start date
You might check the on-line help. Here is what I found
Specify an angle by which U1 and U2 are rotated from UX and UY in the specified coordinate system. See Applying Acceleration Loads for more information.
The angle field has nothing to do with phase angle in loading, it has to do only with local direction for acceleration loads in time history
Specify an angle by which U1 and U2 are rotated from UX and UY in the specified coordinate system. See Applying Acceleration Loads for more information.
The angle field has nothing to do with phase angle in loading, it has to do only with local direction for acceleration loads in time history
- Status
Similar threads
- Question
