Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABOVE 1000MM SSAW SCHSTD PIPES DAMAGE REPAIR

Status
Not open for further replies.

CREERAAM

Mechanical
Joined
Feb 23, 2015
Messages
109
Location
IN
We are having some ASTM A53 Gr.B SCHSTD SSAW service pipes with dents on the body of the pipes happened during the fall of stacks and also a few pipes having out-of roundness towards the ends. Please advise me the standard and accepted practices for the repair of dents as well as the out-of roundness of the pipes with respect to the standards without losing the property of the parent metal?

REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
What does your material specifications have to say on the subject?
What does the project specifications have to say on the subject?
What does the purchaser have to say about accepting damaged materials?

We are not privy to the information you have or should have.

Best regards - Al
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top