Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

about welder test in 6Gr position

Status
Not open for further replies.
mirhosseini

mirhosseini

Industrial
Dec 4, 2003
20
In AWS D1.1, 4.8.1, permited melt-through is 3 mm except for T-Y and K connection.

Now if I have a welder test qualification coupon according to figure 4.27 and melt-through is more than 3 mm can I accept this welder or not?

Regards
H.Mirhosseini
 
Status
Not open for further replies.

Similar threads

W1987
  • Question
Question about weld fillet reinforcement in PJP or CJP joints
Replies
2
Views
2K
SJones
SJones
Karik87
  • Locked
  • Question
Production welding position qualified by box tube test
Replies
0
Views
794
Karik87
Karik87
ThaiVu
  • Locked
  • Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
2K
ThaiVu
ThaiVu
Karik87
  • Locked
  • Question
Welder Qualification with AWS A5.14 ERNiCrMo-3 according to AWS D1.1
Replies
2
Views
355
weldstan
weldstan
danggg
  • Locked
  • Question
AWS D17.1 WELDER CERT. QUESTION
Replies
2
Views
365
GC_Hopi
GC_Hopi

Part and Inventory Search

Sponsor

Back
Top Bottom