HELLO
I don't use Trumpf, only Amada machine
from 1500W to 4000W , mostly alfa/PULSAR
for titanium I use always pure (100%) Argon
Max I already cut is 5mm with good result but just for small
number of parts : less than 10Pcs (PRICE !!)
Normally I cut from 0.5 to 2.5mm for aeronautic parts.
THE...
I have a look to bottles of premix and assist gas we have here
and the oldest is 1998 !!
I haven't notice this kind of problems maybe because our customers are not provided with old bottles by gas suppliers.
I hope you will understand what I say because I'm not really good in english LOL
On the web this thing look like great, but in my case (southwest of France)I never hear that one of my customers was using this kind of product. Sorry ...
The pooh
I have already seen the same problem in one of my customer's laser and my solution was cutting/dividing the slug in two like you was thinking (in my case 0.8mm stainless steel).
The pooh
ATH means in French "trihydrate d'alumine "
it's like bauxite / the mineral base of aluminium
I don't know the exact formula of Corian : it's a patented
material of Dupont/Zodiac
Happy Xmas and happy NewYear
so if you can enter the windows "side" : follow
START / RUN / enter OSK / press VALID key
normally it appears the virtual keyboard
you just need to validate CAPS LOCK
excuse me for grammatical error
I don't speak and write a lot in english !!
the pooh
If it's possible you can pierce with low oxygen gas pressure and power and cut after with nitrogen I guess Remenber to make a dwell between those gas !!
The pooh
hello
In France some of my customers are cutting GALFAN (Al-Si coating) with nitrogen realy without problem from 0.8 to 2mm but a little slower than electrogalva
the pooh
HIE Darkblade
goto function works like this :
GOTOx with Nx
If u want to go the lazer part of the program :
O2086(SANS TITRE)
M102(A5052-1.5)
G06 A1.5 B0
G92 X3050. Y1875.
G90
GOTO2 (go to line N2)
N1
M500
X609.82 Y605.46 T112 (0 4.0)
M13
N2 ( N2 just before M100)
M100
E6
G00 X663.56 Y604.77...
I have never try to cut this kind of adhesive
but first you have to know the film will burn a little
due to the heat of the SS along the cut line
Is it possible for the part's quality ?
the pooh
hello
I reply from france but
let's start with AMADA software : AP100 cad/cam
7025 Firestone Blvd.
Buena Park, California 90621
(877) AMADA US - 877-262-3287
you have also :
lantek Expert II
Lantek Systems, Inc.
2737 South Broadway Suite 209
Tyler, TX 75701
radan Genesis
Radan CIM Inc. 1100...
hello
I have ,as maryon, try to cut two sheets at the same time
on amada alpha/pulsar : aluminium and also steel. Cuting quality is great but small angles are difficult to obtain on the second sheet. IT'S NEED A ROLLER HEAD !!
On the same kind of machine I 've try to cut 2x1.5mm stell with...
hi nathan
Before please check surface of your lens : clean as possible!
You can start by moving the focus point between f -1mm to f-2mm.
try also to increased step by step the pressure I think not more than 12bar
finally reduce speed 200 by 200mm
the pooh
hello
In my country, factories are using the machine you describe :
fabrivision (without coating)
Scanning Accuracy*+-0.05mm (0.002")
Maximum Part Thickness 200mm (8.0")
http://www.metalsoft.com/products/product7/overviewp7.html
THE POOH
hello
I have seen bystronic website : byvention looks interesting !! But it's limited to 8mm mild steel, is it
adapted with your 3/8"(10mm??) and they speak about minimum 1mm however you may cut really thin sus sheet? What about?
Your "biggest concern" : not only for laser machine purchase...
OK Jay
You can also give the dxf file !
remi-1978@wanadoo.fr
I'll test as soon as possible on lasers equiped with fanuc 18i and mitsubishi CNC
But I can say already that amada laser equiped mitsubishi
can do it "normally" because I tested multiG01 - ellipse without any problem !!
The pooh
