Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pipelines, Piping and Fluid Mechanics engineering

momo83
  • Locked
  • Question Question
When to use type of bolt for pipe system
Replies
10
Views
1K
MJCronin
MJCronin
Tuga29
  • Locked
  • Question Question
Piping Systems testing. It's not th
Replies
5
Views
162
Ehzin
Ehzin
Shawthing6927
  • Locked
  • Question Question
Anti Static Hose
Replies
3
Views
166
EdStainless
EdStainless
VKu
  • Locked
  • Question Question
Pulsation dampener requirement
Replies
17
Views
648
LittleInch
LittleInch
KarlwithaK
  • Locked
  • Question Question
Possible FAC, possible weld failure
Replies
3
Views
210
KarlwithaK
KarlwithaK
DavidMcA
  • Locked
  • Question Question
Compressability of corrugated copper gasket
Replies
0
Views
53
DavidMcA
DavidMcA
sbatch20
  • Locked
  • Question Question
Pressure test failure velocity
Replies
18
Views
959
bimr
bimr
Nathan Snider
  • Locked
  • Question Question
Minimum Pipe Diameter Given pressure and flow rate
Replies
3
Views
154
Nathan Snider
Nathan Snider
refiner258
  • Locked
  • Question Question
Hot Tapping Near Pump Suction
Replies
6
Views
520
refiner258
refiner258
Chengin
  • Locked
  • Question Question
Any guide of Piping deflection because of steam tracing....
Replies
5
Views
486
KevinNZ
KevinNZ
CloudNine1
  • Locked
  • Question Question
Insulation heat loss from a pipe
Replies
4
Views
257
IRstuff
IRstuff
TMcRally
  • Locked
  • Question Question
Using venturi effect to empty a water column in a boats hull ?
Replies
13
Views
705
TMcRally
TMcRally
Ashley Coutts
  • Locked
  • Question Question
Size and dimensions of vessel sea chests
Replies
1
Views
540
chief
chief
BRIS
  • Locked
  • Question Question
Do we need accumulators on compress
Replies
3
Views
145
LittleInch
LittleInch
nicolai
  • Locked
  • Question Question
laboratory gas pipe sizing
Replies
5
Views
894
racookpe1978
racookpe1978
JABoomer
  • Locked
  • Question Question
ANSI Pipe Spec - Low Temperature Materials at Larger Diameters
Replies
3
Views
153
GD2
GD2
JohnWeal
  • Locked
  • Question Question
Biogas velocity
Replies
9
Views
1K
georgeverghese
georgeverghese
Arron_
  • Locked
  • Question Question
Alternate terminology for a swivel flange?
Replies
12
Views
392
The Obturator
The Obturator
Spike2000
  • Locked
  • Question Question
ASME B31.3 vs. sanitary tubing
Replies
3
Views
459
XL83NL
XL83NL
don1980
  • Locked
  • Question Question
EN 13480 vs ASME B31.3
Replies
5
Views
461
KevinNZ
KevinNZ
You must log in or register to post here.

Part and Inventory Search

Sponsor

Back
Top