Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

best way to engrave alphanumerics

Status
Not open for further replies.

ugnxdon

Mechanical
Joined
Jan 2, 2004
Messages
4
Location
IN
Hai,

Can any one tell me the best, efficient and timesaving method to engrave alphanumerics on any component (solid or sheet) in modeling.





 
If you're asking the fastest way to model text in UG, then at this point in time, it's by using Wiedemann Engineering's True Type UG. Home page: About $1,000 for one seat.

Now, before going that far, you should know that UG will be adding modeled text as a standard modeling function. Don't expect it to be much in NX3, but as it matures, it should be quite robust.

Tim Flater
Senior Designer
Enkei America, Inc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top