Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allowable Stresses for Low Alloy Steel Castings

Status
Not open for further replies.
manian

manian

Industrial
Joined
Sep 9, 1999
Messages
42
Location
AE
ASME Section II Part D deals with allowable stresses
for various materials. While ASTM A487 Gr 4 Cl A material is covered, some of the other classes of this material
like Cl D are not covered. Could any one throw some light on this and the reason behind it ?
 
Status
Not open for further replies.

Similar threads

Drilling Integrity Super.
  • Locked
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
5K
Geoff13
Geoff13
K
  • Question Question
Calibration of low Pressure - Vacuum Relief valves
Replies
0
Views
939
Kibar Anderson
K
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
abangbikerz
  • Question Question
lowest permissible temp for any material
Replies
3
Views
6K
abangbikerz
abangbikerz
shiraz883
  • Locked
  • Question Question
ASME vs EN 13445| EN 12953 | Allowable stress for EN materials in ASME Sec II part D (Metric)
Replies
3
Views
884
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top