Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Coefficient of Friction of Ti-Ti
- Thread starter will123
- Start date
Refer to ASM Handbook vol 18 - Friction, Lubrication and Wear Technology. Here are some values from page 71.
1. Geometry: flat-on-flat
Humiduty: 50% RH
Static friction coefficient: 0.55
2. ASTM G98 Galling test
Static: 0.47
Dynamic: 0.40
Hope this helps.
1. Geometry: flat-on-flat
Humiduty: 50% RH
Static friction coefficient: 0.55
2. ASTM G98 Galling test
Static: 0.47
Dynamic: 0.40
Hope this helps.
- Status
Similar threads
- Locked
- Question
- Question
