Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UGNX and GM launch

Status
Not open for further replies.
bendall

bendall

Automotive
Joined
Mar 12, 2003
Messages
5
Location
CA
Hello everyone, after installing UGNX and the GM toolkit, I have noticed that GM Launch opens and UGNX must be opened via GM Launch. Does anyone know if there's a way to automate this so GM Launch selects UGNX automatically? Thanks in advance for any input.
 
Sort by date Sort by votes
I´m not sure but isn´t a start file with the tool kit? Should be a .bat file, if not make one your self
 
Upvote 0 Downvote
There's a batch file which starts GMLaunch, which is a java based utility in which the program (UGNX in this case) must be selected from a list of available programs to start.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS
SBlackBeard
  • Locked
  • Question Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
rookiezzz
  • Locked
  • Question Question
Monitor and access the data
Replies
1
Views
1K
cowski
cowski
CAD2015
  • Locked
  • Question Question
Create Sheet and Drawing templates........................
Replies
7
Views
4K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top