Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

analysis a wood rafter with an opening due to mechanical duct

Status
Not open for further replies.

Sam1993

Structural
Joined
Jan 12, 2022
Messages
30
Location
EG
Hello All:
Is it possible to analysis a wood rafter with an opening due to mechanical duct in RISA 3D and apply the loads and study the stresses around it

picture are attached for reference and opening marked in red

Capture_neduqd.png
222_lx0uan.jpg


Thank you
 
Well, if the opening is as big as you drew, its a pretty simple analysis.

Looks like a VERY bad idea.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top