×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Amada FO-NT shuttle

Amada FO-NT shuttle

Amada FO-NT shuttle

(OP)
Earlier this month I went to install a machine. The machine was in really good shape the individual who disconnected it did a good job.

The only problem, the shuttle table control box, with the PLC in it, did not ship with the machine. It is totally lost.

The reason for this post, I'm looking for a replacement control box. Is there someone out there who doesn't use their shuttle table?

Is there someone who knows of a machine being scrapped out?

I have gone through all the obvious solutions. The machine is a 2006. Amada does not have a replacement available.

RE: Amada FO-NT shuttle

I wonder if Amada might have a roster of those machines, where they are?
Other than that, maybe used machinery dealers?

Jay Maechtlen
http://www.laserpubs.com/techcomm

RE: Amada FO-NT shuttle

In addition to control on the shuttle table posts there is an accessory you can put on the main controller podium. Has the safety curtain controls as well as the lift table and workset options.The hardware for controlling the table is built into the main controller. The table side itself only has up down buttons for the lift table and an E stop with a few limit switches to tell controller table height.

RE: Amada FO-NT shuttle



#1 safety and shuttle controls #2 is lift table controls

RE: Amada FO-NT shuttle



If you need Amada software, I can provide it to you.
AP100、sheetworks、vpss3i、 vFactory vLotManager、Amada Order Manager 、Dr.ABE Tube、 Dr.ABE Blank、 Dr.ABE Bend 、DNC5、SigmaTube.

RE: Amada FO-NT shuttle

(OP)
Thanks for the replies. I realized I may need to be more clear.

The standard Amada FO-3015 NT is essentially 3 machines in one. The Fanuc laser that generates the beam, the Fanuc control for the motion system and all the valves switches and buttons that make the cutting magic happen, and the shuttle table.

The shuttle table has its own brain, computer, PLC. For example, When you press "work set ready" on the shuttle table control pendant, the signal goes to the PLC and that raises the table or lowers the table, depending, the PLC confirms the tale it all the way up or all the way down. It checks to make sure the pins are in locking the table, checks that the light curtain around the work area is in the correct state and probably a few other things. When the PLC confirms everything is ready, it sends one signal to the Fanuc control that says "ready".

The box that contains this shuttle PLC,relays, motor starters, wires, terminal strips, is what I am looking for.

RE: Amada FO-NT shuttle

You might try https://laserexpertsinc.com/ ...David Waltmire I believe is who I dealt with.
I had to replace a power supply in the resonator cabinet on our 2006 Amada FO-3015 NT.
They seem to have some decommissioned machines at their facility, that they sell parts off of.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members! Already a Member? Login



News


Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close