Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Racing Track / Circuit - Estimation of Asphalt work Cost

Status
Not open for further replies.
tarekzad

tarekzad

Industrial
Joined
Aug 24, 2018
Messages
38
Location
SA
Dear All

We are mulling to start a racing track / Tactical Mobility Tracing Track in UAE

Therefore we are looking for a good source of construction index ( Rule of thumb) for the Circuit asphalt pavement work

the cost provided by an expert can be lump sum as per USD/m2including all earth work, bituminous work, and road marking or can be provided itemized.

 
Sort by date Sort by votes
suggest you contact a paving contractor and get a budgetary estimate
 
Upvote 0 Downvote
Agree with cvg; this is a groundworks quotation cost. If the land you are working on is virgin & never be used I don't think one would require a SI (Site Investigation) Report. But if the site is a "brownfield site" (previously built-on) then a SI is needed by law. I'm not 100% on this so hopefully someone more qualified can confirm?

The contamination of the land will affect your earthworks price; along with volumes & surface treatments (obviously).

You could split the surfacing package from the groundworks package but you run the risk of additional costs where the surfacing contractor will claim the groundworkers left levels too low etc...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question Question
Work out equivalent CBR from Plate Load test
Replies
1
Views
2K
EireChch
EireChch
G
  • Locked
  • Question Question
which modulus of subgrade reaction for very thick layers of soil cement
Replies
0
Views
835
Gertjan86
G
K
  • Locked
  • Question Question
Construction of Foundation beside retaing wall and through existing pipes
Replies
0
Views
1K
krishnandyn
K
S
  • Locked
  • Question Question
Is anybody good at AGTEK software to calculate the cut and fill volume of road project?
Replies
0
Views
2K
Sandeep32
S
IrenaJ
  • Locked
  • Question Question
Latteral Pressure of a silt pond
Replies
1
Views
778
EireChch
EireChch

Part and Inventory Search

Sponsor

Back
Top