Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
thread483-144296 Can we get these
- Thread starter cjabhijit
- Start date
LittleInch
Petroleum
Try your normal re-inforced branch outlet supplier.
The thread before says these are essentially weldolets with no contour machined in.
The term flatolet is really a mistake - they should just be called zero contour weldolets.
what size and location / use are they called up on?? They should be small size branches ( 1"/ 2") on a very large pipe or vessel (>1m diam?)
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
The thread before says these are essentially weldolets with no contour machined in.
The term flatolet is really a mistake - they should just be called zero contour weldolets.
what size and location / use are they called up on?? They should be small size branches ( 1"/ 2") on a very large pipe or vessel (>1m diam?)
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question