Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to set the linear strength (Cu) profile on the depth?

Status
Not open for further replies.
Guang

Guang

Geotechnical
Joined
Oct 6, 2006
Messages
1
Location
CA
I wanna use a strength profile, where Cu (cohesion) changes linearly with depth.

I know there is an option that divides the soil into many small layers. But it is too much work to exactly simulate this relation and brings some error definitely.

Thanks
 
Status
Not open for further replies.

Similar threads

ShiningEngineer
  • Locked
  • Question Question
How to plot the chosen element values permanent for plot export
Replies
2
Views
3K
ShiningEngineer
ShiningEngineer
zenzizenzizenzic
  • Locked
  • Question Question
How to find ultimate strength and fracture sequence of bolted connections to thin-walledcarbon steel
Replies
2
Views
2K
zenzizenzizenzic
zenzizenzizenzic
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S

Part and Inventory Search

Sponsor

Back
Top