Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fabrication of 99.5% Alumina of 0.5" thick

Status
Not open for further replies.

sridhar

Chemical
Joined
Feb 28, 2000
Messages
1
Location
US
What will be the most cost effective way of fabricating 99.5% Alumina plate of 0.5" thick. Size will be approx. 15" x 12". Required Density: > 98%
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top