Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Z value

Status
Not open for further replies.

tracye

Civil/Environmental
Sep 16, 2009
1
US
Have a 3d file that someone forgot to set the z value to 0 and turn the depth lock on. Now I have cells and lines at all depths. Anyone know a fast way to move all lines to a 0 Z value without doing them one by one?
 
Replies continue below

Recommended for you

Put a fence around all elements and use fence/scale.
Set x=1, y=1, z=0.000001
That will place them almost at zero.

or

Save to 2d file then reference to 3d file and copy into 3d file. If you don't need 3d, leave it as 2d.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top