Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Z bends 1

Status
Not open for further replies.
vetro31

vetro31

Electrical
Joined
Oct 14, 2002
Messages
6
Location
US
Does anybody know what a Z bend is?
 
Sort by date Sort by votes
In regards to what? Generally, it's a bent piece of metal shaped like the letter "Z".
 
Upvote 0 Downvote
Hello btrueblood,

In regards to an off-shore pipeline and risers.
 
Upvote 0 Downvote
I've also heard it used in the manufacturing of automotive leaf springs - as a specific type of leaf spring.

~NiM
 
Upvote 0 Downvote
Are Z bends what French divers get when they come up too fast from Z ocean?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

b_unruhly
  • Locked
  • Question Question
Expected Surface Rougness of a Zn Phosphate treatment on a machined steel bar.
Replies
7
Views
3K
MintJulep
M
awesomeness
  • Locked
  • Question Question
Cathodic protection with Al-Zn-In anodes of carbon steel / 316L
Replies
3
Views
718
awesomeness
awesomeness
NorthCivil
  • Locked
  • Question Question
Metals in contact: zinc, stainless, and zinc-alume coated steel
Replies
18
Views
10K
TugboatEng
TugboatEng
Doodler3D
  • Locked
  • Question Question
CUI vs Zinc Primer
2
Replies
20
Views
1K
SJones
SJones
Mateeng
  • Locked
  • Question Question
CSA Z245.1 Steel Linepipe compliance with NACE MR0175/ISO15156-2
Replies
1
Views
408
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top