Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Yad/Yag Laser Cladding with 316 powder

Status
Not open for further replies.
alloyboy888

alloyboy888

Industrial
Joined
Jan 14, 2003
Messages
1
Location
US
I am experiencing significant micro-cracking in 2nd and subsequent layers of 316 stainless steel powder applied to mild steel with my commercial Yad/Yag laser. I am feeding the powder into the beam externally. No pre-heat. Anyone got any thoughts?
 
Status
Not open for further replies.

Similar threads

Johnwoo1991
  • Locked
  • Question Question
Ball alve seats obtained from plate (A 240 316)
Replies
2
Views
514
SnTMan
SnTMan
SteveSnr
  • Locked
  • Question Question
Stainless 316 welding
Replies
1
Views
471
EdStainless
EdStainless
Laishetti
  • Locked
  • Question Question
Casting powder for 17-4 PH
Replies
5
Views
509
Laishetti
Laishetti
GabrieleB
  • Locked
  • Question Question
AISI 316 CLADD OVERLAY REPAIR
Replies
6
Views
723
EdStainless
EdStainless
efulm4444
  • Question Question
6061-T6 in contact with CF8M Corrosion Concerns
Replies
3
Views
5K
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top