Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
wrought steel phase equilibrium diagram
- Thread starter Meetbhati
- Start date
Wrought steel goes through deformation after initial consolidation from liquid or powder. Ask the material supplier if the material was rolled, forged, extruded, drawn, etc. after casting or sintering or however it was made. For a phase diagram, you can use the basic Fe-C (or Fe-Fe3C) phase diagram. If you need something very specific to 4330V, then try here:
- Status
Similar threads
- Locked
- Question
