Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Writing/Viewing Chinese in UG
- Thread starter Froggy00
- Start date
For the environment (menus, toolbars, text output windows, etc.) to appear in Chinese, that is dependant upon your operating system.
UG supports 2 different font files for drafting & plotting data.
-chinesef: This font encodes the Simplified Chinese characters in codeset GB2312. This is a fixed width font.
-chineset: This font encodes the Traditional Chinese characters in codeset BIG5. This is a fixed width font.
Should you need more assistance, I'd suggest referring to the documentation CD's that come with UG or give GTAC a call.
Tim Flater
Senior Designer
Enkei America, Inc.
UG supports 2 different font files for drafting & plotting data.
-chinesef: This font encodes the Simplified Chinese characters in codeset GB2312. This is a fixed width font.
-chineset: This font encodes the Traditional Chinese characters in codeset BIG5. This is a fixed width font.
Should you need more assistance, I'd suggest referring to the documentation CD's that come with UG or give GTAC a call.
Tim Flater
Senior Designer
Enkei America, Inc.
- Status
Similar threads
- Locked
- Question