Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WPS supported by more than one WPQR

Status
Not open for further replies.

kjell123898

Mechanical
Joined
Jan 7, 2009
Messages
20
Location
NO
Hi
Have any of you heard about if it is defined in any codes or standards whether it is possible to use two WPQR's to support a WPS for small bore tube welding in super duplex provided that all essential parameters in both WPQR's are equal but that each of WPQR's have different wall thicknesses and diameter. The intention is to expand the wall thickness and diameter range in the WPS.

Kjell Gr°nvold
 
Multiple PQRs are used to support a single WPS all the time. For Sec IX see QW-200.2 (f)
 
david339933
Thanks a lot for your advice

br
kjell

Kjell Gr°nvold
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top