Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Workbench, difference of two results computation

Status
Not open for further replies.
ayahk

ayahk

Mechanical
Joined
Apr 23, 2013
Messages
8
Location
DE
Is it possible to compute the difference beween 2 results in ANSYS workbench? for example, from simulation1 results and simulation2 results we somehow subtract the results to get the error?

Thanks alot!!

Regards,
Jessi M.
 
Sort by date Sort by votes
I will reply to myself because i found the solution!
There is a Result system in ANSYS workbench, it can compare the results of 2 simulations or more. After combing all results run the simulation and export data.

Regards,
Jessi M.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
IJR
  • Locked
  • Question Question
Workbench 19: Submodelling (?) error
Replies
0
Views
429
IJR
IJR
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
543
Stick.
Stick.

Part and Inventory Search

Sponsor

Back
Top