Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Work in Matlab with a reduced model in Abaqus

AitorKo

Industrial
Oct 24, 2024
3
Hi,

I'd like to work in Matlab with a reduced model in Abaqus.
Could someone share acode to read stiffness and mass reduced matrix and perform a simple static analysis?

Thank you in advance.
 
Replies continue below

Recommended for you

Hello, not all formats are readable. It depends on what you want to use. If you want the mesh and the restitution basis, you will need the binary results file output.
We develop a toolbox (SDT-FEMLink) that implements such read and much more, and will let you work in MATLAB with a proper FEA framework with display.

If you want to test our demo, you can contact me or check our website www.sdtools.com
 

Part and Inventory Search

Sponsor