Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wood Framed Shear Wall w/ gypsum wall board and screws

Status
Not open for further replies.

SperlingPE

Structural
Dec 27, 2002
591
I am looking for shear wall values.
The IBC 2009 had values. I am using IBC 2012 for this project.
The table in IBC 2012 does not reference screws anymore.

Is there an ESR report or something that has screw values for shear walls.
Or can I use an IBC 2009 table for an IBC 2012 project?
 
Replies continue below

Recommended for you

Go to Table 4.3C of the AWC SDPWS-2008 (American Wood Council Special Design Provisions for Wind & Seismic-2008 edition)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor