Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wire/Cable seal 3-5 mm diameter - Pin hole seal

Status
Not open for further replies.
Abd-ulrhman Hassouneh

Abd-ulrhman Hassouneh

Mechanical
Joined
Aug 28, 2017
Messages
1
Location
JO
Hi,
I'm working on enclosure which it has to be IP68,
I face some problem in making small wire and pins sealed (hole seal).
looking for simple principle to make it seal for Pin with Dim:3 mm.
Regards,
 
Status
Not open for further replies.

Similar threads

dgeesaman
  • Question Question
Decreasing operating range of seal elements over the years
Replies
0
Views
6K
dgeesaman
dgeesaman
rQuestionEngineering
  • Locked
  • Question Question
Why labyrinth seal only operate on 5/s velocity ?
Replies
1
Views
2K
BEMPE16524
BEMPE16524
65CCJ
  • Question Question
480 Mpa (69,620 psi) static seal for hydrotesting at Room Temp.
Replies
0
Views
7K
65CCJ
65CCJ
BasakAbhishek
  • Locked
  • Question Question
Sealing of gases by lip type seal
Replies
7
Views
4K
SB1976
SB1976
turbo05
  • Locked
  • Question Question
Steam Turbine Labyrinth seal leakage
Replies
1
Views
1K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top