Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wind loadings

Status
Not open for further replies.
n6dox

n6dox

Structural
Joined
Oct 22, 2005
Messages
1
Location
US
Using a truncated sphere (80%), 200 mph wind, 40 degree F temperature, monolithic sructure of .035" frp skins (fiberglass fabrica)using polyester resin, and .600 " core of 3#/ cu ft density rigid foam, what is the wind force and maximum buckling force?

n6dox
 
Status
Not open for further replies.

Similar threads

Fblthp
  • Locked
  • Question Question
Abaqus How to show the coordinate system of beam elements in visualization window?
Replies
3
Views
2K
FEA way
FEA way
T.E.Dada
  • Locked
  • Question Question
WindowsError: [Error2] The system cannot find the file specified
Replies
4
Views
1K
FEA way
FEA way
Khawaja Ali
  • Locked
  • Question Question
How to extract the output fields from abaqus using cmd window?
Replies
1
Views
201
IceBreakerSours
IceBreakerSours
Khawaja Ali
  • Locked
  • Question Question
How to print increments/time steps when running a batch file in cmd window for abaqus analysis?
Replies
1
Views
123
Mustaine3
Mustaine3
fluidJ
  • Locked
  • Question Question
.rpy file is not written (Abaqus cae for windows)
Replies
3
Views
830
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top