Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wildfire 3 in Windows 7 Home?
- Thread starter MCLogan
- Start date
There are things that MS has turned off in the home version that Pro/E may require to run.
If you can find ALL the registry settings and added sub-programs and enable them, then it should work in Win7 home the same as Win7 Pro.
It actually may work in Win7 home without doing anything, but PTC does not certify Win7 home as a valid OS.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
If you can find ALL the registry settings and added sub-programs and enable them, then it should work in Win7 home the same as Win7 Pro.
It actually may work in Win7 home without doing anything, but PTC does not certify Win7 home as a valid OS.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
- Thread starter
- #3
Thanks for the response. I am no good at fixing computer problems. I did as the earlier thread discussed, and copied the entire 'proeWildfire 3.0' folder from 'Program Files' on an old computer running XP Pro to a new computer running 7 Home, and when I try to start the program, an error message says: "No write access to C:\Program Files\proeWildfire 3.0\bin, choose another directory for trail creation." Whatever I enter, it can't find the license. Any suggetsions will be much appreciated.
The Pro/ENGINEER licenses are HOST ID or computer specific and cannot be copied from PC to PC because the license file refers to that specific pc.
The actual identifier used by the license is the Ethernet Card's Physical address which you can find by doing the following.
1) Launch Run command, Start > Run or Win & R
2) Type cmd Enter (this will launch the DOS shell cmd.exe)
3) When the command window comes up type
ipconfig /all |more
(The info you need will display first, "|more" shows resulting info in multiple sections instead of all at once,Hit space to see more )
You'll need to request a new license for each machine or Ethernet Card you use.
The physical address reffered to as is made up as 12 alpha-numeric characters in six groups of 2 sepatrated by -
Physical Address. . . . . . . "??-??-??-??-??-??"
This will be shown in the license file typically called license.dat and located in the text\licensing\ folder
C:\Program Files\ProENGINEER Install Directory\text\licensing\license.dat
PTC_HOSTID=??-??-??-??-??-?? will be included in the license.dat file and if that is not the Ethernet Card's ID the license will not work.
You should be able to resolve this by calling Tech Support or your Software Reseller.
Michael
The actual identifier used by the license is the Ethernet Card's Physical address which you can find by doing the following.
1) Launch Run command, Start > Run or Win & R
2) Type cmd Enter (this will launch the DOS shell cmd.exe)
3) When the command window comes up type
ipconfig /all |more
(The info you need will display first, "|more" shows resulting info in multiple sections instead of all at once,Hit space to see more )
You'll need to request a new license for each machine or Ethernet Card you use.
The physical address reffered to as is made up as 12 alpha-numeric characters in six groups of 2 sepatrated by -
Physical Address. . . . . . . "??-??-??-??-??-??"
This will be shown in the license file typically called license.dat and located in the text\licensing\ folder
C:\Program Files\ProENGINEER Install Directory\text\licensing\license.dat
PTC_HOSTID=??-??-??-??-??-?? will be included in the license.dat file and if that is not the Ethernet Card's ID the license will not work.
You should be able to resolve this by calling Tech Support or your Software Reseller.
Michael
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question