I have a problem using my Unigraphics software using my laptop that is 12.1 widescreen in 1280x800 screen resolution. When I draw a circle shape, it turns to an ellipse shape. So when I try opening the file on my desktop computer, the circle is an ellipse. Please help me to solve this problem, cause this messes up my drawing.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Why do my circle shape turns to an ellipse shape?
- Thread starter 0325
- Start date
Try setting your screen resolution to 1280 x 1024 and see what that does.
The softwrae is setup tp compensate for the non-square proportions, but only when using the rati that you get with 1280 x 1024.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
Sr IS Technologist
L-3 Communications
The softwrae is setup tp compensate for the non-square proportions, but only when using the rati that you get with 1280 x 1024.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
Sr IS Technologist
L-3 Communications
if you find the ellipse too frustrating to work with and you wish to keep the screen resolution then you can select Preferences, visualisation, Screen and then Calibrate, drag the sliders to see a circle, this function is not an exact science but it may be satisfactory
regards .......... gary
regards .......... gary
- Status
Similar threads
- Locked
- Question