Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Whats the differensies running CatiaV5 on W2K or XP?
- Thread starter raufoss
- Start date
Hi,
You can do better with XP.
I am working with R12SP4.
With XP I was able to save some CATPart as .model (those did not work under w2k).
I was able to make bigger drawing with only 2G of memory and even much much more with 4G and the /3Gb patch for XP.
Go for it...
You can do better with XP.
I am working with R12SP4.
With XP I was able to save some CATPart as .model (those did not work under w2k).
I was able to make bigger drawing with only 2G of memory and even much much more with 4G and the /3Gb patch for XP.
Go for it...
indocti discant et ament meminisse periti
Eric N.
Eric N.
Configurator
New member
XP can handle more memory per process.
Hi,
Yes with XP you can let Catia access 3 Gb
See link:
Yes with XP you can let Catia access 3 Gb
See link:
- Status
Similar threads
- Locked
- Question
- Locked
- Question