Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the difference between these two steps?

Status
Not open for further replies.
ENGLIAO

ENGLIAO

Civil/Environmental
Joined
Jun 23, 2006
Messages
10
Location
US
I am doing dynamic viscoelastic analysis. I have been seeing there are two steps, which are confusing:
1. General->Dynamic, implicit (or explicit)
2. Visco
I have tried both steps separately and found there was NO any difference in terms of strain response. Am I right?
 
Status
Not open for further replies.

Similar threads

SinaPeugeot
  • Question Question
Applying contact pressure between two parts
Replies
2
Views
11K
SinaPeugeot
SinaPeugeot
F
  • Question Question
What is XFEM
Replies
3
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
7K
polak7
polak7
R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
N
  • Locked
  • Question Question
Cohesive surface-based interaction across multiple steps
Replies
3
Views
3K
nomi9
N

Part and Inventory Search

Sponsor

Back
Top