Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the best approch to combine motion simulations

Status
Not open for further replies.
TimKaluza

TimKaluza

Mechanical
Joined
Jul 6, 2015
Messages
8
Location
DE
Hi there!

We have some assemblies which are all animated through motion simulation. Is there a possibility to combine all the assemblies in a big simulation without recreating all the joints and links again?

Thank you very much,

Your's sincerely
Tim K.
 
Status
Not open for further replies.

Similar threads

Aredybar
  • Locked
  • Question Question
What is the VB code to close NX part file?
Replies
2
Views
730
Bleaker
Bleaker
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
Kenja824
  • Question Question
NX2027 - Is there a fix or is this a Glitch
Replies
4
Views
5K
Rob_N
Rob_N
NXsupport
  • Locked
  • Question Question
Is there a way to make extrude dialog remember the limits options set in the dialogbox
Replies
3
Views
3K
Ammaniya
A
CAD2015
  • Locked
  • Question Question
Is it possible to convert cgm to drawing?
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top