Sumit Hati
Mechanical
I know it's difficult to predict but let's all discuss it and come to a mare solution. At least share your viewpoints.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
What is the Basis of Selection of Codes among API 610,ISO5199, ASME B 73.1 ?
- Thread starter Sumit Hati
- Start date
- Status
- Thread starter
- #3
Sumit Hati
Mechanical
General-purpose for Oil and Gas industry. Generally, they use API 610, but why should we opt for ISO or ASME standards? On which criteria we should go for other standards?
Summit,
You are indirectly asking a very broad question about pump knowledge and expertise.... IMHO
The basis for selection between pump standards depends on the experience and expertise of your specification writers.
The people developing your pump specifications and data sheets should include process, mechanical, hydraulic and electrical engineers who are experienced and know your particular project requirements. Your Plant Operators and Maintenance staff should also have a review.
There is no one single answer to your broad question
MJCronin
Sr. Process Engineer
You are indirectly asking a very broad question about pump knowledge and expertise.... IMHO
The basis for selection between pump standards depends on the experience and expertise of your specification writers.
The people developing your pump specifications and data sheets should include process, mechanical, hydraulic and electrical engineers who are experienced and know your particular project requirements. Your Plant Operators and Maintenance staff should also have a review.
There is no one single answer to your broad question
MJCronin
Sr. Process Engineer
- Status
Similar threads
- Question
- Locked
- Question