Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is a "Class C" Geotextile?

Status
Not open for further replies.
JasonG

JasonG

Civil/Environmental
Joined
Nov 7, 2002
Messages
83
The state stormwater regs specify that geotextile must meet "federal department of transportation requirements for a Class 'C' filter fabric" beneath rip rap and as an interface between layers in infiltration treches. Where can I find the specs for a "Class C" fabric?
 
Status
Not open for further replies.

Similar threads

wesman07
  • Question Question
Help understanding a theory
Replies
6
Views
14K
zelgar
zelgar
meatymatt
  • Locked
  • Question Question
4" Loamy Sand over 6'+- Sandy Clay Loam - What rate should you use for drawdown?
Replies
2
Views
10K
swazimatt
swazimatt
PT60056
  • Locked
  • Question Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
7K
Ekenny_G
Ekenny_G
beej67
  • Locked
  • Question Question
Is it standard FEMA practice to smooth out a dip in a flood profile that's due to choking or a jump?
Replies
1
Views
337
beej67
beej67
Atros
  • Locked
  • Question Question
For probabilistic analysis is there a way to assign a return period for a Probable Maximum Flood
Replies
0
Views
304
Atros
Atros

Part and Inventory Search

Sponsor

Back
Top