Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is a communications system

Status
Not open for further replies.

cranky108

Electrical
Joined
Jul 23, 2007
Messages
6,293
Location
US
Several of us are having a debate about what is a communications system.
I contend that an 8 foot serial cable between two relays is not a communications system make. But others disagree.

To me a communications system connects relays between two substations, but would not include serial cables within the same control building.

How are other companies looking at this?
 
The comms begin when the signal leaves the relay on the way to the other relay. Intrastation comms are still comms, not just interstation comms.
 
I agree with davidbeach.

Whether its argued that its a 'system' rather than an 'interface' is probably up for debate, but its still a means of communications between devices. I'd suggest that if we extended your definition, then IEC61850 in a substation would not be a communications system either.

EDMS Australia
 
If I want to change the communication cable I call a communication technician. If I want change relay settings I call a relay technician. If I want to change the wiring to a relay I call a wire technician. Sometimes it is a pain to have multiple people involved but each task does require a somewhat different skill set. While the cable itself might be a component rather than a system, I would certainly think that two relays talking to each other through a cable is a communication system.
 
bacon4life - you guys should just hire a P&C technician. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top