Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
What instead of RBE3
- Thread starter gregorsky
- Start date
- Thread starter
- #3
Thank You.
I use Patran 2004 for preprocessing but I cannot find this constraint there - is it with different name?
Available are:
explicit, rigid fixed, rigid pinned, linear (surf-surf,surf-vol,vol-vol), quad. (surf-surf,surf-vol,vol-vol), slider 12, elbow 17, pin 9, tie 5, revolute, v local, universal, ss linear 13, ss bilinear 14 and ssf bilinear 15
I use Patran 2004 for preprocessing but I cannot find this constraint there - is it with different name?
Available are:
explicit, rigid fixed, rigid pinned, linear (surf-surf,surf-vol,vol-vol), quad. (surf-surf,surf-vol,vol-vol), slider 12, elbow 17, pin 9, tie 5, revolute, v local, universal, ss linear 13, ss bilinear 14 and ssf bilinear 15
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question