Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What does this warning mean?

Status
Not open for further replies.
ML24

ML24

Mechanical
Joined
Sep 24, 2010
Messages
5
Location
CA
When I'm in advanced simulation and I try to solve a model, I get the warning: There are no output requests selected for step "Subcase - Static Loads 1".
 
Sort by date Sort by votes
It means you've not selected any outputs for the solution; usually the default is set up with basics such as displacement, stress, etc. You need to look at the case setup and ensure that your Structural Output Requests are set up.
 
Upvote 0 Downvote
I changed the output and it solved without any warnings or errors... however I still can't get a solution. I had the exact same settings for another part (No output requests, that is) I did FEA on and it worked so why is this one not working?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
NX2027 - Is there a fix or is this a Glitch
Replies
4
Views
5K
Rob_N
Rob_N
K
  • Locked
  • Question Question
Sew: tool does not share a common boundary
Replies
3
Views
2K
cowski
cowski
Befuddled
  • Locked
  • Question Question
I'm sure this used to work....didn't it?
Replies
2
Views
2K
Befuddled
Befuddled
JohnRBaker
  • Locked
  • News News
On this day in history...
Replies
0
Views
386
JohnRBaker
JohnRBaker
imti7
  • Locked
  • Question Question
what 'preserve shape' exactly does to model?
Replies
1
Views
506
JohnRBaker
JohnRBaker

Part and Inventory Search

Sponsor

Back
Top