Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What does "P/L" mean

Status
Not open for further replies.
dmm128

dmm128

Electrical
Joined
Mar 1, 2004
Messages
1
Location
US
I was looking through a schematic for a tv and under the capacitor it said 2kv and "P/L" and no capacitance listed. I have never seen that before so any help would be appreciated.
 
Sort by date Sort by votes
I don't know off hand what they mean by P/L, but perhaps it is a "select on test" component. The exact value is chosen at the test stage.

Maybe...
 
Upvote 0 Downvote
Place later? ;-)

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Upvote 0 Downvote
Agree with "Parts List", I've seen this a lot on chassis used for several models/screen sizes.

Benta.
 
Upvote 0 Downvote
(See) "Parts List" makes sense.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
What kind of control is this
Replies
2
Views
2K
iop95
iop95
BrunoBB
  • Locked
  • Question Question
ATEX Eex"ia" & Eex"d" Mixed
Replies
2
Views
439
PersonalProfile
PersonalProfile
K
  • Locked
  • Question Question
What Are the Biggest Challenges in Schematic Design for Industrial and Construction Projects?
Replies
4
Views
10K
karlou
K
dfdt
  • Locked
  • Question Question
What is the general practice of gro
Replies
3
Views
967
ViasionTech
ViasionTech
durablack2
  • Locked
  • Question Question
two proximity sensors, One LED light for system status
Replies
2
Views
2K
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top