Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What are dynamics for sudden water flow stoppage?

Status
Not open for further replies.

mrelet

Mechanical
Nov 1, 2001
49
I test swimming pool drains-- sort of. I block the drain with a foam pad after establishing constant flow gpm. I take data and the pressure/time trace shows an initial sharp drop and then an oscillatory form on top of a decay back towards the pressure of the water head of the tank. Longer suction pipe lengths have longer periods.

Does anyone know if this can be modelled as a mass-spring damper system where the mass is the incompressible flow and the spring and damper properties are mainly in the foam? Would you know a good source of instruction/information?
 
Replies continue below

Recommended for you

You'll find the pipe elasticity is an important factor.

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor