johnchrist
Mechanical
If pipe group number change,is there required to change WPS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding 2
- Thread starter johnchrist
- Start date
- Status
-
1
- #2
StevenHPerry
Mechanical
Does the old WPS cover the new P-number?
- Steve Perry
This post is designed to provide accurate and authoritative information in regard to the subject matter covered. It is offered with the understanding that the author is not engaged in rendering engineering or other professional service. If you need help, get help, and PAY FOR IT.
- Steve Perry
This post is designed to provide accurate and authoritative information in regard to the subject matter covered. It is offered with the understanding that the author is not engaged in rendering engineering or other professional service. If you need help, get help, and PAY FOR IT.
-
1
- #3
- Thread starter
- #4
johnchrist
Mechanical
Mr.Steven....new P no is cover...
Mr. Kiwi...It is ASME WPS...old wps Base metal is P8 G1 to P1 G1.
New Base metal fall on P8 G2 To P1 G1...
Thanks for ur responses...
John...
Mr. Kiwi...It is ASME WPS...old wps Base metal is P8 G1 to P1 G1.
New Base metal fall on P8 G2 To P1 G1...
Thanks for ur responses...
John...
- Status
Similar threads
- Question