Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Welding X65
- Thread starter twoheads
- Start date
Yes. For repair less than 20% of wall thickness, I would suggest ER70 S-2 filler metal. Prepare the weld repair region by removing any sharp corners, use a local preheat of 200 deg F and stringer beads. Slow cool, blend grind and perform a post repair NDT using either Liquid Penetrant or wet fluorescent MT for final acceptance of the repair area.
- Status
Similar threads
- Solved
