Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Welding Pipe A53 to Steel Plate A36
- Thread starter macan1
- Start date
It is advisable though to check that the ratio of tube thickness to plate thickness be less than 1:3, otherwise some special design detail may be required to obtain a sound weld.
- Status
Similar threads
- Locked
- Question
