Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding CRS1018 to AISI 304

Status
Not open for further replies.
MadMango

MadMango

Mechanical
Joined
May 1, 2001
Messages
6,992
Location
US
What is the recommended welding rod material to MIG or TIG these materials together? Ray Reynolds
Senior Designer
Read: faq731-376
"Probable impossibilities are to be preferred to improbable possibilities."
 
Sort by date Sort by votes
A typical filler metal would be ER309L, but this can vary based on the type of application, PHWT if any, intended use, etc.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S.G
  • Locked
  • Question Question
Welding L-80 Type-1 Tubing to AISI 4130 Hammer Union
Replies
1
Views
2K
jmec87
jmec87
metboss
  • Question Question
Welding Procedure Specification (WPS) for the base metal AISI 8630(weld overlay cladding
Replies
2
Views
556
gtaw
gtaw
Engingeeer
  • Question Question
nut welding fixture
Replies
2
Views
13K
Engingeeer
Engingeeer
IdanPV
  • Question Question
Welding of S355JR
Replies
1
Views
486
kingnero
kingnero
John Jones
  • Locked
  • Question Question
WPS/WPQR 304/316
Replies
1
Views
1K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top