Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welder Qualification

Status
Not open for further replies.
salohcin

salohcin

Petroleum
Joined
Oct 21, 2003
Messages
5
Location
IT
Is a 6G qualified welder qualified to weld a jacket leg can to a plate girder or does he have to qualify to 6GR.
 
Sort by date Sort by votes
If this is a T, K, Y connection (which it probably is) then yes, it would need to be qualified with a restriction ring.
 
Upvote 0 Downvote
It is a T connection however the angle bevel does not change as in pipe-pipe connection and I cannot find conclusive definition in AWS D1.1 for T K Y for plate-pipe connection, it only mentions plate-plate or pipe-pipe, thus my original question. Any ideas?
Thanx for the feedback anyway.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Karik87
  • Locked
  • Question Question
Welder Qualification with AWS A5.14 ERNiCrMo-3 according to AWS D1.1
Replies
2
Views
552
weldstan
weldstan
naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib
JITHK
  • Locked
  • Question Question
Multiprocess qualification in single coupon AWS D1.1 CODE
Replies
5
Views
1K
JITHK
JITHK
Karik87
  • Locked
  • Question Question
Base metal qualification range AWS D1.3
Replies
0
Views
528
Karik87
Karik87
danggg
  • Locked
  • Question Question
AWS D17.1 WELDER CERT. QUESTION
Replies
2
Views
479
GC_Hopi
GC_Hopi

Part and Inventory Search

Sponsor

Back
Top