Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weld Symbol

Status
Not open for further replies.
mykeo

mykeo

Mechanical
Joined
Jun 10, 2013
Messages
28
Location
US
Hi I am new to nx6 and I am looking for the weld assistant or weld symbol. I can not find it nor can google find any threads on it.

Thanks for any response!

Mike
 
Sort by date Sort by votes
The weld symbols are must better in NX7.5, keep in mind you are on software that is over 5 yrs old.
There is no weld assistant that you are able to utilize.
 
Upvote 0 Downvote
Thanks,

Unfortunatly I have to utilize NX6 and although it may be over 5yrs old it is new to this company as well as me.

Thanks for your response though!

Mike
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS
jerry1423
  • Locked
  • Question Question
Weld Between Points
Replies
1
Views
550
jerry1423
jerry1423
imti7
  • Locked
  • Question Question
Why section views doesn't show diaØ symbol?
Replies
2
Views
286
imti7
imti7
Equilibriu
  • Locked
  • Question Question
Name of Custom Symbol for cell
Replies
0
Views
206
Equilibriu
Equilibriu
Befuddled
  • Locked
  • Question Question
Part Families - Threads (symbolic . Detailed)
Replies
2
Views
1K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top