Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weld Seam / Bead Width

Status
Not open for further replies.
oguzzz

oguzzz

Mechanical
Joined
Mar 1, 2020
Messages
15
Location
TR
Good day to all,

What is the weld seam/bead width tolerance for as welded longitudinal and circumferential joints according to ASME SecVIII Div1/SecIX/AWS D1.1?

Thanks in advance
 
Sort by date Sort by votes
I don't recollect any restrictions in either AWS structural codes or ASME construction codes. I do recollect a restriction in API 1104.


Best regards - Al
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K.P.M.
  • Locked
  • Question Question
Insert plate width reduction
Replies
3
Views
1K
TGS4
TGS4
Karik87
  • Question Question
CVN test at Weld Metal with ER70S-6
Replies
19
Views
11K
weldstan
weldstan
ird192
  • Locked
  • Question Question
nozzle to head weld NDE
Replies
6
Views
4K
TomLee777
TomLee777
V
  • Locked
  • Question Question
Is pressure retaining fillet weld qualification by fillet weld possible under ASME IX.
Replies
3
Views
3K
IdanPV
IdanPV
K.P.M.
  • Locked
  • Question Question
Shell-Dish Joint weld applicability
Replies
6
Views
784
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top