Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Weir Flowmeters
- Thread starter gladkenn
- Start date
sharp v-notch:
Q = 2.5 tan(interior angle/2) H^2.5
sharp rectangular:
Q = .67 L H^1.5
broad crested rectangular:
Q = 3.3 L H^1.5
ogee rectangular:
Q = 4 L H^1.5
Determine max Q, design weir large enough to contain flow.
Remember: The Chinese ideogram for “crisis” is comprised of the characters for “danger” and “opportunity.”
-Steve
Q = 2.5 tan(interior angle/2) H^2.5
sharp rectangular:
Q = .67 L H^1.5
broad crested rectangular:
Q = 3.3 L H^1.5
ogee rectangular:
Q = 4 L H^1.5
Determine max Q, design weir large enough to contain flow.
Remember: The Chinese ideogram for “crisis” is comprised of the characters for “danger” and “opportunity.”
-Steve
- Status
Similar threads
