Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water-retaining structures

Status
Not open for further replies.
kayah

kayah

Structural
Joined
Dec 18, 2002
Messages
19
Location
CA
What is the North American (US +/or Canadian) code of practice for designing water-retaining concrete structures?

I have ACI 350, but it doesn't go into as much detail on crack control and serviceability requirements as I expected. Can someone steer me in the right direction?
Thanks.
 
Sort by date Sort by votes
ACI 350 is pretty much state of the art. The crack control provisions were a little better explained in the 1989 edition, but it's still there in the current revision. If you can find a copy, take a look at it. Do you have some particular question?
 
Upvote 0 Downvote
No, I think that answers the question.
Thanks!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Engineerbygut
  • Question Question
Restrained Retaining Wall
Replies
4
Views
8K
ChipB
ChipB
MAEngr
  • Question Question
Retaining wall repair rec
2
Replies
32
Views
30K
XR250
XR250
SD12
  • Question Question
Coaxiality tolerance for the welded structures
Replies
7
Views
8K
Stick.
Stick.
M
  • Question Question
Retaining concrete reinforced block wall
Replies
10
Views
9K
Mickey11
M
zero1238
  • Question Question
Retaining Wall Inspection Criteria
Replies
15
Views
13K
zero1238
zero1238

Part and Inventory Search

Sponsor

Back
Top