Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water Distribution Modelling 1

Status
Not open for further replies.

dalepuskas

Civil/Environmental
Joined
Jul 9, 2007
Messages
9
Location
CA
Does anyone know of any references, preferably electronic that can show calcs for water distribution modelling?

I have a site where I know the FireFlow requirement, and I know the flow from a hydrant adjacent to the site, and I know the flow from a hydrant at the opposite side of the site, I want to know how much of an increase in flow if I loop the two.

Thanks
 
Thanks, I found that after I posted, it's a really good resource.
 
Try Epanet. It is free to download. It has the same engine as some very expensive commercial products that are recommended in this forum.

Geoffrey D Stone FIMechE C.Eng;FIEAust CP Eng
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top