Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warning on Load Transfer 2

Status
Not open for further replies.
Pouriab

Pouriab

Structural
Joined
Sep 21, 2008
Messages
6
Location
CA
I'm getting several warnings on load transfer. E.g.
Warning: Area load transfer, Check L30, F345. Total loss = 210.621866 KN. For load case LIVE.
How can I rectify such problems?
 
Sort by date Sort by votes
It is a meshing problem. Check your meshing at this location. You probably might get a warning regarding this when you run your analysis.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Miladm2
  • Question Question
Issue with Unwanted Load Transfer to Edge Members
Replies
0
Views
2K
Miladm2
Miladm2
S
  • Question Question
Negative Eigenvalue for 16-sty Building with 2 transfer floors
Replies
2
Views
8K
sohjiangwen
S
compe_ad
  • Locked
  • Question Question
Warning messages!!!!
Replies
3
Views
564
Just Some Nerd
Just Some Nerd
H
  • Locked
  • Question Question
Etabs Load case Question
Replies
2
Views
1K
hkngrdk
H
Angel Vila
  • Locked
  • Question Question
SEISMIC USER DEFINED LOAD
Replies
3
Views
3K
sticksandtriangles
sticksandtriangles

Part and Inventory Search

Sponsor

Back
Top